Forklift Training Programs Coquitlam

Forklift Training Programs Coquitlam - If you are searching for a job as an operator of a forklift, our regulatory-compliant lift truck training programs provide exceptional instruction in many styles and types of forklifts, lessons on pre-shift inspection, fuel kinds and dealing with fuels, and safe use of a forklift. Practical, hands-on training assists those participating in obtaining fundamental operational skills. Program content comprises existing rules governing the utilization of lift trucks. Our proven forklift courses are designed to provide training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

How to Handle Loads Safely

Do not raise or lower the fork whilst the lift truck is moving. A load must not extend above the backrest because of the risk of the load sliding back toward the operator. Inspect for overhead obstructions and ensure there is adequate clearance before raising a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it slightly back.

The lift truck is less stable if a load is in a raised position. Ensure that no one ever walks beneath the elevated fork. The operator must never leave the forklift when the load is lifted.

While handling pallets, forks should be level and high enough to go into the pallet and extend all the way below the load. The width of the forks must provide equal weight distribution.

Before unloading or loading the truck, chock the wheels and set the brakes. Floors should be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed in order to support a semi-trailer which is not coupled to a tractor. The height of the entrance door should clear the forklift height by a minimum of 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

Do not stay in a lift truck for a long time without proper ventilation. The interior of the truck should be properly lighted and free of obstructions, trash and loose objects. Inspect for holes in the floor. The installation of material which are non-slip on the floor would help avoid slipping. Clear whichever obstacles from docks and dockplates and make sure surfaces are not oily or wet.

Lift trucks should not be utilized to tow or push other forklifts.

Click to Download the pdf