Forklift Training Schools Coquitlam

Forklift Training Schools Coquitlam - Have A Safe And Efficient Work Place With Our Forklift Training Schools

Are you looking for a job as a forklift driver? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of lift trucks, pre-shift check, fuel kinds and handling of fuels, and safe utilization of a lift truck. Practical, hands-on training assists participants in acquiring essential operational skills. Course content comprises existing regulations governing the use of lift trucks. Our proven forklift courses are intended to provide training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

Whilst the forklift is in operation, do not raise or lower the forks. Loads must not extend higher than the backrest. This is due to the danger of the load sliding back in the direction of the operator. Check for overhead obstacles and ensure there is plenty of clearance prior to lifting a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.

The lift truck is less steady if a load is in a raised position. Ensure that no one ever walks beneath the elevated fork. The operator should never leave the forklift while the load is raised.

The forks should be level when handling pallets, and high enough to extend all the way into and below the load. The fork's width should provide equal distribution of weight.

Set the brakes and chock the wheels prior to unloading and loading the truck. The floors should be strong enough to support the combined weight of the load and the forklift. Fixed jacks could be installed to be able to support a semi-trailer which is not coupled to a tractor. The height of the entrance door must clear the height of the forklift by at least 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

Click to Download the pdf