Forklift Training School Coquitlam

Forklift Training School Coquitlam - Forklift Training School - For The Safety Of Both The Equipment And The User - OSHA and CSA establish criteria for forklift safety training that meets existing regulations and standards. Anyone intending to operate a forklift is needed to successfully complete safety training prior to utilizing whatever type of forklift. The accredited Forklift Operator Training Program is intended to offer trainees with the practical skills and knowledge to become an operator of a forklift.

Mobile Equipment and Vehicle safety rules that apply to forklift operation involve pre-shift checks, and rules for lifting and loading.

Prior to a shift starting, an inspection checklist must be carried out and submitted to the Instructor or Supervisor. If whatever maintenance issue is discovered, the equipment must not be used until the problem is addressed. To be able to indicate the machinery is out of order, the keys have to be removed from the ignition and a warning tag placed in a visible spot.

Safety regulations for loading would consist of checking the load rating capacity on the forklift to determine how much the machinery can handle. When starting the equipment, the forks must be in the downward position. Keep in mind that there is a loss of approximately one hundred pounds carrying capacity for every one inch further away from the carriage that the load is carried.

Lifting must begin with the driver moving to a stopped position approximately three inches away from the load. The mast must then be leveled until it has reached a right angle with the load. Lift the forks to one inch under the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other workers. Never allow forks to drag on the ground.

Click to Download the pdf